What is the standard of the mask meltblown non woven fabric ?

 Meltblown cloth is the key material of masks. Meltblown cloth mainly uses polypropylene as the main raw material.


Different countries have different standards of the meltblown,and testing method.


China melt-blown non woven fabric


As key filter material of mask, our meltblown can reach the standard as below:

**3-ply surgical mask:

European standard: EN 14683 type I / type II / type IIR;

American standard: ASTM F2100 level 1/ level 2/ level 3,

**5-ply 3D mask:

European standard: FFP1/ FFP2;

Korean standard: KN95, KN99, KF94,

American standard: N95, N100

If you want to know more about the meltblown non woven fabric for mask, please contact us.

评论

发表评论

此博客中的热门博文

What kinds of non-woven fabrics are used for sanitary napkins, and what are the characteristics of such non-woven fabrics?

图片
  According to the production process of non-woven fabrics, the following fabrics can be used for sanitary napkins:  thermal bonded non-woven fabrics , including hot-air non-woven fabrics and hot-rolled non-woven fabrics. 1.  Hot air non-woven fabric : In the production of hot air non-woven fabric, a certain proportion of low melting point bonded fiber or two-component fiber should be mixed into the fiber mesh. After the fiber is combed, the hot air on the drying equipment is used to penetrate the fiber mesh, so that it is heated and bonded to produce non-woven fabric. The product features good bulkiness, softness and excellent permeability. 2.  Hot rolled non-woven fabric : after the fibers are carding into a mesh, the low melting point fibers are melted by the roller (under certain high temperature and pressure) to form a mesh, so there will be rolling points on the surface. The product features light, thin and soft. 3.  Spunlaced non-woven fabric : generally,...
阅读全文

From PP to non woven fabric to mask, do you understand these basic knowledge?

图片
Masks are non woven fabrics. Non woven fabrics   are non woven fabrics, which are made of oriented or random fibers. Medical masks   are generally multi-layer structures, generally referred to as SMS structures. At present, the highest number of layers in China is 5 layers, namely SMMMS. The S in this represents thespunbondlayer (Spunbond), the fiber diameter is relatively thick, about 20 microns (μm), the two layers of Spunbond layer is mainly used to support the entire nonwoven fabric structure, does not have much effect on the barrier . The most important thing in the mask is the barrier layer or themelt-blownlayer M (Meltblown). The fiber diameter of the melt-blown layer is relatively thin, about 2 microns (μm), so it is only one tenth of the diameter of the spunbond layer. This prevents Bacteria and blood penetration play a vital role. General medical masks usually use a 20 gram meltblown cloth, and N95 cup-shaped masks use a 40 gram or higher meltblown cloth. Accord...
阅读全文

How to increase the thickness of hot air non woven fabric?

图片
  Hot-air non woven fabric  is a kind of dry heat-bonded non woven fabric, which is formed by using hot air on drying equipment to penetrate the fiber web after the fibers are carded into a web, so that it is heated and bonded.  Hot air non woven products  have the characteristics of high bulkiness, soft feel, good dryness, and good air permeability. It is a thin product made with composite fibers. The gap between the fibers is large. When used, the liquid can quickly penetrate through the fiber gap to absorb Therefore, it is widely used in disposable products, such as baby diapers, adult incontinence pads, feminine hygiene products, and napkins, bath towels, disposable tablecloths, etc.; thick products are used to make cold-proof clothing, bedding, baby sleeping bags, Mattresses, sofa cushions, etc. High-density hot air non woven products can be used to  make filter materials , sound insulation materials, shock absorption materials, etc. Compared with spunbonde...
阅读全文